- Part Numbers RVK3300 (20K) and RVK3305 (25K)
- No mounting rails means it's removable and you can use your truck for more than towing.
- Fully articulating head allows front to back and side to side pivoting.
- Cam action latching handle for easy release, even when parked on unlevel sites.
- 1" thick, wrap-around jaws fit kingpin perfectly, eliminating sloppy starts and stops.
- Polyurethane bushings provide a quiet, rattle free towing experience.
- Fits 4 pucks in truck bed. Release handles and it easily converts to a level bed.
- 20,000 lb GTW/5,000 VTW or 25,000 lb GTW/6,250 VTW
- Limited Lifetime Warranty
A puck system is a 5-hole towing system that is installed onto the frame of the truck by the truck manufacturer.
Over the years, we’ve seen a few products traditionally sold in the aftermarket picked up by the Big 3 and offered in trucks from the factory to boost their margins. Some have been successful and some have gone away. The hitch framework Ford started offering in 2010, put on trucks at the factory, is an attempt to take gooseneck and fifth-wheel hitches in this direction. Ultimately consumers will decide whether they are in favor of this or not.
What we have been hearing from customers is that they sometimes buy a Ford truck unaware that the hitch prep package is in it. We also hear that customers feel forced into buying a truck with the hitch prep package because there just aren’t trucks available without it. There’s nothing like taking away a consumer’s choice and calling it an ‘option’! The prep package has a list price of $370.
Because Ford’s 25K fifth-wheel hitch has a sticker price of $1695 and because we have had many requests for a Companion that will work with Ford’s prep package, we are now offering one. B&W’s Companion compatible with the Ford Prep Package uses the same coupler we have always used, but the base has four points of attachment and retails for $969. It is rated at 20K.
We still offer the Companion with single-point attachment and it still utilizes an underbed mounting system that can accommodate towing a gooseneck, as well. In fact, we highly recommend this as your best option, especially if you plan to tow a gooseneck. Our system (the Turnoverball) offers the ability to turn the ball over and stow it in the receiver. Ford's gooseneck option includes a bag to stow the ball in when it’s not being used, missing a feature many customer’s desire.
The Companion has a medium gray powder-coat finish.
Yes, since all of our hitches in the Companion line use the same coupler head, you may purchase the base that works best for you. Depending on your needs, we offer both stationary and slider versions for the Ram, GM and Ford factory prep packages, as well as the Flat Bed and single point attachment Companion that mount into the Turnoverball.
The short answer is yes, many folks towing fifth-wheel trailers with shortbed trucks successfully use the Companion.
There are many factors to consider when addressing the issue of cab clearance. To answer the question for you specific truck and trailer, pay attention to the following:
1. Pin Box Location - Is the Kingpin even with the front of the trailer, or is it recessed behind the front of the trailer? Some 5th wheel manufacturer's have compensated for the prevalence of shortbed trucks by building extended kingpin boxes.
2. Type of trailer and shape. Narrower trailers allow a tighter turning radius. Trailers that are built with rounded corners accommodate more cab clearance than squared corners.
3. Finally, the type of maneuvering that will be required while towing. Do you anticipate lots of sharp turns while towing, or is it only highway driving with little or no backing?
You do not need a lube disc when pulling your RV. Using a lube disc is a matter of preference. While utilizing a lube disc is a much cleaner option, you can simply apply an automotive type chassis grease to the top plate of the hitch. If you would prefer a greaseless option, we highly recommend our Amercan made graphite lube disc. https://www.bwtrailerhitches.com/product/graphite-lube-plate
All of B&W's 5th wheel hitches utilize a cam action release for the jaws. When the latch handle is secured in the closed position, the jaws will stay locked around the kingpin of your trailer for towing. When the latch handle is moved to the open position, the tension on the jaws is released, even though they may not visibly pop open. If your truck and trailer are on uneven ground, there may be a slight bind between the jaws and trailer kingpin. This is normal. With the cam mechanism open, there is a nothing holding the jaws together. Ensure that the handle pin is in place, keeping the handle in the locked open position, then simply pull forward. The jaws will open and you'll be unhitched from your trailer.
- Product Weight: Base 78 lbs, Coupler 75 lbs
- Footprint: 33.5" Wide x 16.5" Deep
- Distance between puck holes: 30" Wide x 13" Deep
- Three vertical adjustments from 16.75" to 18.75."
- 2" of front to back adjustment with two coupler positions.